
         C O M P A Q (R)  C O M P U T E R  C O R P O R A T I O N

                 Compaq Smart Array-2 Controllers Driver
                 

1.  INTRODUCTION

    This file contains the instructions necessary for installing the Compaq 
    Smart Array-2 Controllers Driver using the Compaq component installer.

2.  MANUAL DRIVER INSTALLATION

    To update the Compaq Smart Array-2 Controllers Driver manually instead of 
    installing the component package, follow these steps:

     1. Start Windows 2000 and log on as an administrator.

     2. From the Start menu, point to Programs and select Administrative 
        Tools.

     3. Click Computer Management.

     4. Expand Systems Tools by clicking the + sign.

     5. Click Device Manager.

     6. Expand SCSI and RAID Controllers by clicking the + sign.

     7. Double-click the adapter entry that contains Compaq Smart Array-2 to
        display the Properties page.

     8. Select the Driver tab.

     9. Click Update Driver to invoke the Update Device Driver Wizard and 
        click Next at the introduction screen.

    10. Check Search for a suitable driver for my device (Recommended) and
        select Next.

    11. Check the box next to Specify a location. Clear the boxes next to 
        Floppy disk drives and CD-ROM drives, then click Next. Click Browse
        and search for the location where you previously copied the CPQARRAY2 
        folder.

    12. Double-click the CPQARRAY2 folder and select CPQARRAY2. Click Open and
        click OK to confirm the driver. The Driver File Search Results screen
        displays.

    13. If the path to the driver that you specified in step 12 is displayed, 
        click Next and proceed to step 16. Otherwise, proceed to step 14.

    14. Check the box next to Install one of the other drivers and click Next.

    15. Choose the entry that displays Compaq as the Provider and Manufacturer
        when selected, then click Next.

    16. Click Yes on the Digital Signatures Not Found screen, then click Yes 
        on the Confirm File Replace screen.

    17. Click Finish after the driver is copied to the hard drive.

    18. Repeat steps 7-16 for each Compaq Smart Array-2 controller entry.

    19. Reboot your system.

-----------------------------------------------------------------------------
     Copyright  2001, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks 
                      of their respective companies.

