Msg# TSF  Size #Rd  Date  Time From   MsgID        To
60390 PN   1755   0 15-Aug 1817 KC4WTX 60390_KD6TH  WA2ISE ()
 Sb: Re: DJ160 DTMF Decode File


I received your message about the DTMF decoding on the DJ-160, and I thought
I should tell you that the process is not that complicated.
1) Put radio on frequency to catch tones to be decoded.
2) Push the DIAL CH button (lower right corner of keypad) The LCD will indicate
the channel currently selected. The channel must be 3 to decode DTMF. If it
is not Channel 3 then use the M button (top left) to change selected channel.
Once you have the M3 in the window you can push the DIAL CH button again to
bring the display back to indicate the frequency. The word DIAL will remain
in the lower right corner of the LCD window.

From this point on any DTMF will be stored in MEM channel 3, but you can not
recieve DTMF while you are looking at MEM channel 3 , you must be looking at
the frquency being displayed while decoding. To see the decoded data, just
push DIAL CH and read the displayed data. Use the frequency knob to rotate
the stored DTMF tones that do not appear. The radio will store 16 digits on
each transmission, but the window will only show about 6 at a time. As your
message indicated, any new data will over write the old...
73's Joe KC4WTX @ KB4VOL
end of file