==============================================================================
                             K E N W O O D
   >>>   A M A T E U R   R A D I O   S E R V I C E   B U L L E T I N   <<<
==============================================================================

                        Kenwood Service Centers

   Kenwood Service Corporation             Kenwood Service Center, East
   2201 East Dominguez Street              829 Lynnhaven Parkway, Suite 130
   Long Beach, California 90801            Virginia Beach, Virginia 23452
   Telephone 1-310-639-5300                Telephone 1-804-340-1702

==============================================================================

BULLETIN # 838
MODEL: VFO-230
SUBJECT: OPERATION ON 230 VOLTS
                                                        
      To operate the VFO-230 on 240V AC, the power transformer
      primary tap must be rewired from 120V to either the 220V
      or 240V tap.
      
      1. Unplug the AC power cable and VFO interconnecting cable.
      
      2. Remove the top cover.
      
      3. Move the AC line from the 120V (Red) to either the 220V
         (Green) or 240V (Blue) transformer winding.
      
      4. Change the AC fuse from 0.5A to 0.3A. Tag the power cord
         at the back of the unit to indicate that the transformer is
         wired for 240V AC, and the power fuse should be 0.3A and
         not 0.5A.
      
      5. Replace the top cover and cable up to verify your work.