SANYO CMP310

NOTES:  This is a dual NAM unit.
        The ESN prefix is 175 decimal & AF hex.
        Sanyo: 416-421-8344

NAM PROGRAMING:

1.  Turn power on.

2.  Within ten seconds enter: M (MUTE) 3 1 0 #.

3.  Enter 2 5 6 7 2 5 2 RCL.

4.  The up arrow key stores and increments each step.  See exceptions
    after step 13 below.

5.  Press CLR to correct an entry.


PROGRAMING DATA

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

01       10 DIGITS           TEL NO         MIN (AREA CODE & TEL NUMBER)
02       00000 - 32767       SID            SYSTEM ID
03       0 OR 1              Local Use      LOCAL USE MARK
04       0 OR 1              MIN MARK       MIN MARK
05       0333 OR 0334        IPCH           INITIAL PAGING CHANNEL
06       2 DIGITS            Accolc         ACCESS OVERLOAD CLASS
07       0 OR 1              Prefer Sys     PREFERRED SYSTEM
08       2 DIGITS            GIM            GROUP ID (10 IN USA)
09       4 DIGITS            Lock Code      LOCK CODE
10       0 OR 1              End to End     END TO END (DTMF) DIALING
11       0 OR 1              A/B SELECT     ALLOW USER A/B SYS SELECT
12       0 OR 1              Area Code      DISPLAY AREA CODE
13       0 OR 1              DTX            DTX/VOX TRANSMISSION

PRESS STO INSTEAD OF UP ARROW AFTER STEP 13.

14       STO OR CLR          STO OR CLR     PRESS STO TO CONTINUE
                                            OR CLR TO ABORT
15       END, 2 OR 3         SELECT 1-3     PRESS END TO FINISH, 2
                                            FOR NAM 2 OR 3 FOR NAM 3

REPEAT STEPS 01 THROUGH 09 FOR NAM 2 AND/OR 3.  NOTE THAT EACH NAM HAS
IT'S OWN INDEPENDANT LOCK CODE.  PRESS STO INSTEAD OF UP ARROW AFTER
STEP 09, LOCK CODE.

LOCK: PRESS F 5, THEN FOLLOW MENU, UNLOCK: ENTER 4 DIGIT CODE