From: bernie@metapro.DIALix.oz.au (Bernd Felsche) Newsgroups: rec.radio.shortwave Subject: Re: SANGEAN 803A DIN pinout please? Organization: MetaPro Systems, Perth, Western Australia >Could someone with a sangean service manual please send (or post) the >pinout for the DIN connector on the side? And more importantly, the >levels and impedence? >From the back of my owner's manual: (Schematic 86-2) 3,4,5: Common 1: Left 2: Right The signal is passed from PCB A-1 to PCB B via connector J (pins 1 and 2), a pair of 1uF caps, and a pair of 5k6 resistors. The signal is tied to common via 1k resistors. Levels are as per DIN I expect, certainly lower than 0.7V p-p. Connector J pins 1 and 2 are the same signal as for pins 1 and 2 of connector I which passes raw audio to PCB A-2. Subsequently, (after treble, bass, balance and volume) processed audio also passes onto PCB B. -- +-----+ Bernd Felsche _--_!\ #include / \ bernie@metapro.DIALix.oz.au 328 Albany Highway, X_.--._/ Fax: +61 9 472 3337 Victoria Park, Western Australia 6100 v Phone: +61 9 362 9355