                                 DosZap V1.2

DosZap.com is a very powerful utility designed to remove the dongle from your
software. The only requirements are that you have the original program and the
hardware that came with the master.

[ INSTALLATION ]

Step #1: Make sure you have the hardware dongle installed correctly on your
         computer.

Step #2: Make a back-up copy of your software on your harddrive.

Step #3: Create a directory called DosZap and copy all files into this
         directory.

Step #4: You should put a second copy of DosZap.com into your c:\dos dir.

Step #5: At a command DOS prompt type: DosZap

If you installed Doszap correctly you should see help instructions displayed.


[ USAGE ]

Example:
Program name  Headache.exe
Working dir   d:\doszap

You would type this at a DOS prompt...

cd d:\doszap  [ENTER]
d:\  [ENTER]

The DOS should look like this...

d:\doszap> DosZap Headache.exe /magic  [ENTER]

Step #1: At this point you should put a copy of the program that you would
         like to remove the dongle in your Doszap directory.

Step #2: Type this: Doszap Headache.exe /magic

Step #3: Execute the program you just zapped.

Step #4: Type this again: Doszap Headache.exe /magic

Step #5: Execute the program you just zapped again.

Step #6: Remove the dongle from your computer. You don't need it anymore!

Step #7: Copy the program file you just zapped and put it back in it's
         original directory. Make sure you don't overwrite the original.