ALPINE 9510
NAM Type: Fujitsu
Manufacturer: Fujitsu
Programmer: Curtis or Bytek
ESN Prefix DEC: 150
HEX: 96
ESN, S/N Match Required: YES
Programmable Handset: No
Available Channels: 666
Phone Number Format: XXX-XXX-XXXX
Lock Code Format: XXX
MIN Option: Enabled
Repertory Option: Enabled
Handsfree Option: Enabled or Disabled
Local Use Option: Enabled
End-to-End Signalling: Enabled
Horn Alert Option: Enabled
System ID Format: XXXXX
Preferred Systems: A or B
Access Overload Class: XX
Group ID Format: XX
Initial Paging Channel: 333 or 334
Station Class: 00
Horn Alert: F + #(Aux)
New Unlock Code: NAM
System Select: F + 1 + X
X=1 (A then B)
X=2 (B then A)
X=3 (A only)
X=4 (B only)
X=5 (Home)
ALPINE 9511
NAM Type: EEPROM
Manufacturer: Fujitsu
Programmer: Handset
ESN Prefix DEC: 150
HEX: 96
ESN, S/N Match Required: Yes
Programmable Handset: Yes
Available Channels: 832
Programming Sequence: Power On
F + LOCK
POWER OFF
POWER ON
#626#7764726 (within 10 seconds)
HOLD (*) key until tone stops
Enter Data for each step then press STOR
Press SEND to write data
#Digits
System ID Format: 5 XXXXX
Local Use Option: 1 1
MIN Option: 1 1
Mobile Number: 10 XXX-XXX-XXXX
Station Class: 2 08
Initial Paging Channel: 3 333 or 334
Access Overload Class: 2 XX
Preferred System: 1 0 (B) or 1 (A)
Group ID Format: 2 XX
Lock: 3or4 XXX or XXXX
Call Timer: 1 4 (see i)
Auto Lock: 1 1 (see ii)
Call Restriction: 1 1 (see iii)
i. Call Timer - 1 Timer off
2 6-seconds
3 30-seconds
4 60-seconds
ii. Auto Lock - 1 Manual Lock, No out
2 Manual Lock, No calls
3 Auto Lock, No out
4 Auto Lock, No calls
iii. Call Restriction - 1 No Restriction
2 No Memory Dialing
3 No Long Distance
4 Both 2 and 3
5 Memory Calls only
ALPINE 9511 NAMS 2,3,4
Programming Sequences: Power On
Unlock Power (if locked)
(F) (7) (NAM Number - 2, 3, or 4)
(F) (Lock)
Power Off
Power On
Follow Programming Code and Steps from Top Model
Horn Alert: F + # (Aux)
New Unlock Code: NAM
System Select: F + 1 + X
X=1 A then B
X=2 B then A
X=3 A only
X=4 B only
X=5 Home
ALPINE 9525 and 9530
NAM Type: EEPROM
Manufacturer: Fujitsu
Programmer: Handset
ESN Prefix DEC: 150
HEX: 96
ESN, S/N Match Required: Yes. Manufacturer Prefix + Last 4 or 5 digits
Programmable Handset: Yes
Available Channels: 832
Programming Sequence: Power On
F + LOCK
Power Off
Power On
# + 626 + # + 7764726 (within 10 seconds)
Hold (*) key until tone stops
Enter data for each step then press STOR
Press SEND to write data
# of Digits
System ID Format: 5 XXXXX
Local Use Option: 1 1
MIN Option: 1 1
Mobile Number: 10 XXX-XXX-XXXX
Station Class: 2 08 (Mobile) or 14 (Portable)
Initial Paging Channel: 3 333 or 334
Access Overload Class: 2 XX
Preferred System: 1 1(A) or 0(B)
Group ID Format: 2 XX
Unlock Code: 3or4 XXX or XXXX
Call Timer: 1 4 (i)
Auto Lock: 1 1 (ii)
Call Restriction: 1 1 (iii)
System ID Inhibit #: 5 XXXXX
System ID Inhibit #: 5 XXXXX
System ID Inhibit #: 5 XXXXX
i. Call Timer Increment - 1 Timer Off
2 6-seconds
3 30-seconds
4 60-seconds
ii. Auto Lock - 1 Manual Lock, no out
2 Manual Lock, No calls
3 Auto Lock, No out
4 Auto Lock, No calls
iii. Call Restriction - 1 No Restriction
2 No Memory Dialing
3 No Long-Distance
4 Both 2 and 3
5 Memory Calls only
NAMS 2-4
Programming Sequence: Power On
Unlock Power (if locked)
F + 7 + NAM 2, 3 or 4
F + LOCK
Power Off
Power On
Follow Programming Code and steps from top example.
ALPINE 9550 Portable
NAM Type: EEPROM
Manufacturer: Fujitsu
Programmer: Handset
ESN Prefix DEC: 150
HEX: 96
ESN/Serial Number Match: Yes. Manufacturer prefix + last 4 or 5 digits
Programmable Handset: Yes
Available Channels: 832
Programming Sequence: Power On
F + Lock
Power Off
Power On
# + 626 + # + 7764726 (within 3 seconds)
Hold (*) key until tone stops
Enter data for each step then press STOR
Press SEND to write data
# digits
System ID Format: 5 XXXXX
Local Use Option: 1 1
MIN Option: 1 1
Mobile Number: 10 XXX-XXX-XXXX
Station Class: 2 14
Initial Paging Channel: 4 0333 or 0334
Access Overload Class: 2 XX
Preferred System: 1 1(A) or 0(B)
Group ID Format: 2 XX
Unlock Code: 3or4 XXX or XXXX
Call Timer: 1 4(i)
Auto Lock: 1 1(ii)
Call Restriction: 1 1(iii)
i. Call Timer Increment - 1 Timer Off
2 6-seconds
3 30-seconds
4 60-seconds
ii. Auto Lock - 1 Manual Lock, no out
2 Manual Lock, No calls
3 Auto Lock, No out
4 Auto Lock, No calls
iii. Call Restriction - 1 No Restriction
2 No Memory Dialing
3 No Long-Distance
4 Both 2 and 3
5 Memory Calls only
Programming Sequence: Power On
Unlock Phone (if locked)
F + 7 + NAM 2, 3 or 4
F + LOCK
Power Off
Power On
Follow Programming Code and steps from above
New Unlock Code: NAM
System Select: FCN + 1 + X
X=1 AB
X=2 BA
X=3 A only
X=4 B only
X=5 Home
Curent status may be reviewed with RCL/ALT + FCN + 1
© 1994-1996 Copyright Sinister Networks. All rights
reserved. May not be redistributed or modified without permission of
Sinister Networks. Do not fold, spindle, or mutilate. Fnord.
Other names and marks used in here are the property of their respective
owners, until and unless decided otherwise in a valid court of law. The
absence of a service mark,
trademark symbol or fnordmark in connection with the marks identifying
products or services of other vendors does not indicate
the absence of registration of those marks or devices. All marks identified
herein are used or registered in the United States of
America and may or may not be used and/or registered in other countries
and planets.