CT-302 (170-1051) NAM Programming

STEP 1 (Enter Program Mode):

Type:   *3001#12345  9    Phone Responds:  INSTALL
Type:                     Phone Responds:  IDENTIF INFO PRI
Type:     (see Note 1)    

 Note 1: If you wish to program the phone for a 2nd cellular phone
         number, press  BEFORE pressing .  At this point the
         phone will display "OPT INFO DISABLED".  Now type:  and
         then .  You may now continue with Step 2 as normal.

STEP 2 (Programming the Primary NAM information):

The phone will now inform you of the parameter it wants you to enter on
the top line with the previously programmed parameter (or factory
default) on second line.  The starred (*) lines require information that
MUST be supplied by the cellular carrier.

Line 1 of Phone: HOME SYS  Type:  5-digit Home System ID then 
Line 1 of Phone: ACCESS    Type:   IF line 2 displays: 0 then 
Line 1 of Phone: LOCL OPT  Type:   IF line 2 displays: 0 then 
Line 1 of Phone: PHON      Type:  10-digit phone number then 
Line 1 of Phone: ST CLASS  Type:  1 0 then 
Line 1 of Phone: PAGING CH Type:  4-digit Paging Channel then 
                                   (Note: Channel A is: 0333,
                                          Channel B is: 0334)

Line 1 of Phone: O-LOAD CLASS Type: 0 and last digit of phone # then
                                    
Line 1 of Phone: PREF SYS     Type:  to toggle between "A" and "B",
                                    then   (Note: A if Paging Ch is
                                    0333, B if Paging Ch is 0334)
Line 1 of Phone: GROUP ID     Type: 2-digit Group ID then 
Line 1 of Phone: SECURITY     Type: 5-digit Security Code then 
Line 1 of Phone: SER NR       Type:  (Do NOT change this)
Line 1 of Phone: 1 DATE       Type:  (Do NOT change this)
Line 1 of Phone: 2 DATE       Type: (todays) 6-digit date (in the form:
                                    mmddyy), then 
Line 1 of Phone: INSTALL      Type: 

The phone should now be correctly programmed.

Settings List:                              Accessories:

 0   Lock Phone
 1   Display Carrier Priority       17-605    Rapid Battery Charger
 11  Change Carrier Priority (A/B)  17-607    Additional Battery
 3   Display Time of Last Call      17-606    Mounting Kit and
 33  Display Call Timer Total                 Power/External Antenna
 44  Enable/Disable Key Entry Tone            Adapter
 5   Change Lock Code               39-08006  Handsfree Kit
 6   Change Auto-Shutoff Time                 (Customer Order Only:
 7   Change Primary/Secondary NAM              901-363-9260)
 8   Clear Call Timers