BGPD(8)			   Version 0.88			  BGPD(8)


NAME
       bgpd - a BGPv4, BGPv4+, BGPv4- routing engine for use with
       Zebra


SYNOPSIS
       bgpd [ -dhpPv ] [ -f config-file ] [ -p bgp-port-number	]
       [ --bgp_port=port-number ] [ -P vty-port-number ]


DESCBGPTION
       bgpd  is	 a  routing  component	that works with the zebra
       routing engine.



OPTIONS
       -d, --daemon
	      Runs in daemon mode, forking and exiting from  tty.


       -f, --config-file config-file
	      Specifies	 the  config  file to use for startup. If
	      not specified this option will  likely  default  to
	      /usr/local/etc/bgpd.conf.


       -h, --help
	      A brief message.


       -p, --bgp_port=port
	      Set the port that bgpd will listen to for bgp data.


       -P, --vty_port port-number
	      Specify the port that the bgpd VTY will listen  on.
	      This  defaults  to  2605, as specified in /etc/ser-
	      vices.


       -r, --retain
	      When the program terminates, retain routes added by
	      bgpd.


       -v, --version
	      Print the version and exit.



COMMANDS
	router zebra  -- (Move routes into kernel table)
	router bgp [AS-NUMBER]
	bgp router-id [BGP-ROUTER-ID]

	network [NETWORK] area [BGP-AREA-ID]
	no network [NETWORK]

	aggregate-address [NETWORK]

	neighbor [PEER-IP-ADDRESS] remote-as [REMOTE-AS]
	neighbor [PEER-IP-ADDRESS] version [ 4 | 4+ | 4- ]

	neighbor [PEER-IP-ADDRESS] description
	no neighbor [PEER-IP-ADDRESS] description

	neighbor [PEER-IP-ADDRESS] route-map [in | out]
	neighbor [PEER-IP-ADDRESS] distribute-list [in | out]
	neighbor [PEER-IP-ADDRESS] next-hop-self
	neighbor [PEER-IP-ADDRESS] weight [WEIGHT]
	neighbor [PEER-IP-ADDRESS] default-originate
	neighbor [PEER-IP-ADDRESS] ebgp-multihop

	neighbor [PEER-IP-ADDRESS] shutdown
	no neighbor [PEER-IP-ADDRESS] shutdown

	clear ip bgp [PEER-IP-ADDRESS]

	show ip bgp [NETWORK]
	show ip bgp reg-exp [AS-REGEXP]
	show ip bgp summary
	show ip bgp neighbor [PEER-IP-ADDRESS]
	show ip bgp route

	show debug

	debug bgp
	debug event
	debug update
	debug keepalive

	no debug event
	no debug update
	no debug keepalive



FILES
       /usr/local/sbin/bgpd
	      The default location of the bgpd binary.


       /usr/local/etc/bgpd.conf
	      The default location of the bgpd config file.

       $(PWD)/bgpd.log
	      If the bgpd process is config'd to output logs to a
	      file, then you will find this file in the directory
	      where you started bgpd.



WARNING
       This man page is intended as a quick reference for command
       line options, and for config file commands. The definitive
       document is the Info file zebra.



DIAGNOSTICS
       The  bgpd process may log to standard output, to a VTY, to
       a log file, or through syslog to	 the  system  logs.  bgpd
       supports many debugging options, see the Info file, or the
       source for details.



SEE ALSO
       References to other related man pages:

       ripd(8),	  ripngd(8),   ospfd(8),   ospf6d(8),	zebra(8),
       vtysh(1)



BUGS
       bgpd  eats  bugs	 for  breakfast. If you have food for the
       maintainers try <bug-zebra@gnu.org>



AUTHOR[S]
       See <www.zebra.org>, or the Info file for an accurate list
       of authors.

Zebra Beast - BGPD	    July 2000				3
