Antigravity Part 1

File: UFO83

HI saw your bull asking about antigravity,free energy ect, It was 15 years ago when I used to go down to the town of Mortimer in the county of Berkshire I was introduced to a one Mr John.R.R.SEARL.What Mr Searl had invented was a "ether-vortex-turbine generator" and he had in fact developed a saucershaped commercial aircraft.

The principal of it is allegedly that,when a metal annulus is rotated at sufficient speed,the conduction electrons are displaced outwards by centrifugal force,so producing a very intense negative charge on the outside perimeter and a positive charge on the inside.

The rotating electric field so obtained can be tapped by induction coils around the annulus to provide current for electromagnets placed in a electric motor arrangement around the annulus so as to drive the annulus,thus producing a feedback effect resulting in very intense electric and magnetic fields. when the electric potential is about 10 14(ten to the power of 14) volts, this being conducted to a metal hull around the annulus,shielding from both gravity and inertia is obtained. because of the shape of the rotor and the need to maximize the charge on the hull, the best shape of hull is like two saucers clamped together at very sharp edge.Directional control is obtained by use of flight coils to produce asymmetry in the (force field)".

From a private letter of Mr C.B. Wynniatt

Professional Engineer

25 Commins Street Onerahi,Whangarei,

New zealand.

The Ether Vortex Turbine by J.R.R. Searl,

England.

The Barret Report

issued by P.L. Barret Bsc.

In 1949, Mr J.R.R. Searl was employed by the midlands electricity board as a electronic and electrical fitter. He was enthusiastic about the subject of electricity,though he had no formal education on the subject other than what is required by the job.Unhindered by conventional ideas about electricity, he carried out his own investigation into the subject. During work on electrical motors and generators,he noticed that a small EMF elector magnetic field ,was produced by spinning metal parts the negative towards the outside and positive towards the rotational axis.In 1950 he experimented with rotating slip rings and measured a small EMF on a conventional meter. He also noticed that when the rings were spinning freely and no current was taken,his hair bristled.

CONTINUED IN PART TWO